Why Choose Our Van Storage Boxes?
TecVanlife and RoamLabX offer purpose-built exterior van storage boxes for travelers who want to move bulky, wet or dirty gear out of the living area while keeping it organized for the road. The shared collection includes compact gear boxes, long multisport formats, split-door designs and utility storage in aluminum and carbon-fiber-and-aluminum configurations. Because mounting and fitment vary by product, always confirm the published dimensions, empty weight and carrier requirements for your exact van before ordering.
Choose storage around the gear you carry
Compare compact Grande and Venti formats, long Trenta multisport boxes, split-door models and utility options rather than adapting a loose household bin.
Keep living space available
Exterior storage can separate skis, snowboards, tools, recovery equipment and camping gear from sleeping and kitchen areas. The right solution depends on your carrier and intended load.
Compare aluminum and hybrid construction
The collection includes aluminum models and carbon-fiber-and-aluminum options. Review each product page for its published material, dimensions and empty weight before choosing.
Use product-specific mounting information
Mounting locations and included hardware differ by model. Check the product listing and verify compatibility with your van, rear-door carrier or roof-rack setup before purchase.
| Buyer consideration | Purpose-built van box | Rooftop cargo box | Generic hitch box | Loose interior bins |
|---|---|---|---|---|
| Typical location | Rear carrier or roof rack, depending on model | Roof rack or crossbars | Hitch-mounted platform or carrier | Inside the van |
| Access | Varies by mounting height and carrier | May require reaching or climbing | May affect rear clearance or door access | Accessible inside but uses living or cargo space |
| Best comparison point | Published size, empty weight, material and fitment | Roof capacity, height and crossbar fitment | Receiver rating, clearance and swing-away needs | Interior space, restraint and organization |
Shop the shared storage-box collection through either TecVanlife or RoamLabX. RoamLabX is also developing additional storage solutions; product details and availability will be announced when they are ready.
Door-Mounted Seal: A Small Detail That Matters
On the pictured Venti Carbon configuration, the perimeter rubber seal is mounted on the inside of the storage-box door instead of sitting along the main loading edge of the box opening. That placement keeps the gasket away from the path used to slide skis, tools, recovery gear and bulky camping equipment into the box.
Keeping the seal out of the loading path may reduce the chance of cargo scraping, snagging or wearing it during everyday use. When the door closes, the seal presses against the box opening to support the weather-protection function described for the product. It is an easy detail to overlook when comparing van rear storage boxes, but it can matter when a box is opened and loaded repeatedly on the road.
Check the exact model: seal construction and placement can vary across the collection. Review the individual product page for the stated seal and weather-resistance details rather than assuming every model is identical.
Van Rear Storage Box Buying Guide: What to Look For
Choosing a van rear storage box starts with the gear you need to carry and the mounting system already on your van. A box that works for skis or snowboards may be unnecessarily long for recovery gear, while a compact box may not provide the clearance needed for bulky camping equipment. Compare the points below before ordering, and use the published product specifications rather than choosing by appearance alone.
What do you plan to carry?
Long multisport boxes suit skis, snowboards and other extended gear. Compact Grande and Venti formats organize smaller equipment, while split-door and utility designs address different access or installation needs.
Rear carrier or roof rack?
Do not assume every box mounts in the same place. Check whether the specific model is intended for a rear-door carrier, rack, platform or roof-mounted setup, and confirm the required mounting surface.
Measure the box and usable clearance
Compare exterior length, width and height with door swing, ladder access, lights, license plate visibility and nearby accessories. Leave practical clearance for opening the box and loading gear.
Account for the complete installed load
Add the published empty box weight, mounting hardware and expected cargo. Confirm that your carrier, rack and vehicle mounting points are rated for the complete load.
Compare construction, not just appearance
Available options include aluminum and carbon-fiber-and-aluminum configurations. Compare the published weight, construction details and intended use of each exact model.
Review openings, locks and seals
Door layout, locking hardware and sealing details vary. Use only the protection and security information stated on the individual product page, and select a design that matches how often you need to reach the gear.
What van storage-box styles are available?
- Long multisport boxes: designed around extended equipment such as skis and snowboards.
- Compact exterior gear boxes: shorter formats for tools, camping gear and everyday equipment.
- Grande-capacity boxes: larger-format options when additional exterior storage is needed.
- Split-door boxes: layouts designed for installations or access needs involving split doors.
- Utility and specialty storage: purpose-specific products that should be selected from their individual specifications.
Before You Buy
Measure twice, review the exact product page, and confirm dimensions, empty weight, mounting position, included hardware and carrier compatibility. If fitment is uncertain, contact the seller with your van year, model, roof height, wheelbase and current rack or carrier information.
Complete Exterior Van Storage Box Collection
Explore exterior storage options for Sprinter, Transit and ProMaster camper-van builds. The collection includes long multisport boxes, compact gear boxes, Grande models, split-door designs, utility storage and soft road-trip organizers. Use this page to compare the intended gear, published dimensions, empty weight, construction and mounting notes available for each product, then confirm fitment for your exact van and carrier before ordering.
Shop by Storage Need & Equipment Profile
Ski, Snowboard & Golf Boxes
Engineered with a vertical profile up to 75.6 inches in height, the Trenta lineup provides enclosed storage for long sports equipment such as skis, snowboards, and golf bags that cannot fit into standard cargo boxes.
Camping & Tool Boxes
The Venti series provides a compact 29.5-inch vertical footprint, offering an ideal volume-to-weight profile for recovery gear, hand tools, camp kitchen items, and power cables mounted to rear door racks.
Grande High-Capacity Boxes
The Grande box family delivers maximum cubic volume for bulky adventure equipment, inflatable paddleboards, camp chairs, and bulky gear that requires a wide internal layout.
Split-Door Storage Boxes
Featuring independent dual-compartment access, split-door boxes allow you to retrieve essential tools or straps without opening the entire main storage chamber, keeping gear organized on the trail.
Diesel Fuel Tank Storage
Specialized aluminum utility storage built specifically to house auxiliary diesel fuel tanks or exterior liquid canisters safely outside the main vehicle cabin.
Modular Road Trip Storage
Soft-sided storage cubes and door-panel storage units designed for internal garage organizational systems, clothes packing, and noise-free interior gear staging.
Shop by Construction Material: Aluminum vs. Carbon Fiber Hybrids
Selecting the right construction material depends on your vehicle's total weight budget, structural preferences, and aesthetic choices. Compare each product’s published construction, empty weight, dimensions, finish, seal and mounting requirements before choosing.
All-Aluminum Construction
Aluminum is widely used for exterior vehicle storage. Compare the exact alloy, finish, hardware, seal, dimensions and empty weight published for each model; these details vary across the collection.
- Metal enclosure; verify material and finish on the product page
- Check the product page for finish, sealing and care guidance
- Available across Grande, Venti, Trenta, and Split-Door profiles
Carbon Fiber & Aluminum Hybrids
The hybrid products in this collection combine carbon-fiber and aluminum components. Use the published empty weight for the exact model—rather than a general material assumption—when calculating carrier, hinge and payload requirements.
- Compare the published empty weight for the exact model
- Confirm construction and mounting details on the product page
- Carbon-fiber-pattern exterior surfaces on applicable models
Storage Box Product Family Comparison
Use this table as a starting point, then review the linked product page for the latest specifications and confirm compatibility with your rack or carrier before ordering.
| Product model | Material | Published dimensions (W × D × H) | Published empty weight | Typical gear use | Mounting notes |
|---|---|---|---|---|---|
| Trenta Ski / Multisport (Carbon) | Carbon fiber & aluminum | 19.7″ × 15.7″ × 75.6″ | 49 lb | Skis, snowboards and long outdoor gear | Review the current rack and carrier requirements on the product page |
| Trenta Ski / Multisport (Aluminum) | Aluminum | See current product specifications | See current product specifications | Skis, snowboards and long outdoor gear | Confirm roof-rack or carrier compatibility for your installation |
| Venti Storage Box (Carbon) | Carbon fiber & aluminum | 19.7″ × 15.7″ × 29.5″ | 24.7 lb | Camping gear, tools and utility equipment | Rear-door installation; review the product’s hardware requirements |
| Venti Storage Box (Aluminum) | Aluminum | 19.7″ × 15.7″ × 29.5″ | 52 lb | Camping gear, tools and utility equipment | Product record lists roof-rack or rear-carrier use; confirm your setup |
| Grande Storage Box (Carbon) | Carbon fiber & aluminum | 19.7″ × 15.7″ × 23.6″ | 20.9 lb | Bulky camping and recovery gear | Review carrier compatibility and total installed load |
| Grande Storage Box (Aluminum) | Aluminum | 19.7″ × 15.7″ × 23.6″ | 37 lb | Bulky camping and recovery gear | Review carrier compatibility and total installed load |
| Split-Door Storage Box (Carbon) | Carbon fiber & aluminum | See current product specifications | See current product specifications | Exterior gear storage with split-door access | Confirm the required rear-door carrier and available clearance |
| Split-Door Storage Box (Aluminum) | Aluminum | See current product specifications | See current product specifications | Exterior gear storage with split-door access | Confirm the required rear-door carrier and available clearance |
| Diesel Fuel Tank Storage Box | Aluminum | See current product specifications | See current product specifications | Storage for a compatible auxiliary diesel-fuel-tank setup | Mounting hardware is listed; confirm the carrier and tank configuration |
Carrier, Rack & Fitment Verification Checklist
Installing a van rear storage box requires proper hardware integration with your vehicle's rear doors or carrier rack system. Before selecting a box model, run through this verification checklist for your exact van setup:
- Carrier Weight Ratings: Confirm that the total combined mass of your mounting rack, empty storage box, and loaded gear stays within the manufacturer's rated payload limit for your rear door hinges and carrier frame.
- Rear Door & Bumper Clearance: Measure door swing radii and bumper steps to ensure opening the storage box lid or doors will not strike tail lights, ladder rungs, or spare tire carriers.
- License Plate & Camera Visibility: Verify that the mounted box profile does not obstruct your factory rear backup camera, license plate, or tail lamps. Use license plate relocation brackets if necessary.
- Vehicle Width & Blind Spots: Ensure the box width (e.g., 19.7" on Venti/Trenta models) sits within your vehicle's side-mirror sightlines.
- Hardware Matching: Confirm whether your carrier rack utilizes standard utility grid hole patterns or requires specific mounting plates (e.g., Sprinter Rear Door No-Drill Aluminum Gear Rack).
Frequently Asked Questions
What is the weight difference between carbon fiber and aluminum storage boxes?
Published weights vary by model. Compare the exact dimensions and empty weights shown on the individual aluminum and hybrid product pages, then include the carrier and planned cargo in the total.
Can I mount a ski storage box on my rear door carrier rack?
While long multisport boxes like the Trenta are often adapted to rear-door utility carriers, always review the listed mounting specifications. For instance, the Trenta Carbon page lists universal roof-rack mounting hardware, so buyers must verify bracket compatibility with rear-door rack builders prior to ordering.
Are exterior storage boxes weather-resistant?
Weather-related claims vary by product. For example, the Venti Carbon product page describes an aviation-grade rubber seal and calls it weather-tight. Do not assume every box is waterproof; check the exact product description and care instructions.
How do I determine the right box size for my camper van?
Measure the gear you intend to transport first. Long items like skis require tall boxes like the Trenta (75.6" H), whereas general recovery tools and camping gear fit into compact boxes like the Venti (29.5" H) or high-volume Grande units.
Equip Your Camper Van with Exterior Storage
Explore our complete catalog of storage boxes, mounting gear, and carrier racks engineered for Sprinter, Transit, and ProMaster builds.